پارامترهای ماژول PAN 06

.

در جدول زیر پارامترهای ماژول روشنایی دو پل خانه هوشمند زی ویو فیلیو، PAN 06 نشان داده شده است

Parameter Number Parameter Size Parameter Name Parameter Values
1 1 Selected Relay 1 Select relay1 : Only relay1 can be controlled and report.
2 Select relay2 : Only relay2 can be controlled and report.
3
(Default)
Select relay1 & relay2 :Relay1 and relay2 can be controlled and report at the same time.
2 1 Edge / Pulse / Edge-Toggle mode 1
(Default)
Edge mode: this mode is suitable for the bi stable wall switch that has indicator point on the switch, and the same position correspond to same state of relay1 and relay2. if the PAN06 relay change the state because of receiving Z-Wave RF command, it may need two times of change (switch on to off or switch off to on) to let relay back to the correspond state.
2 Pulse mode: this mode is suitable for the toggle type wall switch to swap the state of Relay1 or Relay2.
3 Edge-Toggle mode: this mode is suitable for the normal bi-stable switch, every time when change the state of the wall switch will also swap the state of Relay1 or Relay2
3 1 Restore switch state mode 0 SWITCH OFF
1
(Default)
LAST SWITCH STATE
2 SWITCH ON
4 2 Auto off timer 0
(Default)
Disable auto off function
1 to 32767 1s ~ 32767s
5 1 RF off command mode 0
(Default)
Switch Off : It switches to OFF state. The default setting is Switch Off.
1 Ignore : The switch off command will be ignored.
2 Switch Toggle : It switches to the inverse of current state.
3 Switch On : It switches to ON state.
6 1 Existence of Endpoint3 1
(Default)
Endpoint3 exist
2 No Endpoint3